Installing a gutter guard is key to ensuring that your home and gutter is protected. Know how to install your gutter guard by following the steps outlined in this article.
When people think about the exterior of their home, they often focus on the outside walls and roof. However, there is one aspect that many homeowners forget to consider: the gutters. Gutters are a crucial part of any house since they are responsible for collecting rainwater from your roof and directing it away from your foundation.
However, gutters don’t work if you don’t install them properly! If you want to ensure that your gutter system is working at its best, you need to know how to install A1_Gutter_Guards correctly. This article will serve as a guide to help you do so!
Step 1: The first thing to do is to inspect the gutter and determine if it needs repair or not. If there are any cracks in your gutters, you need to get them fixed before installing a gutter guard Adelaide. Proper gutter guard installation won’t matter if the gutter itself is deteriorating. So make sure you inspect and fix any issues you have in your gutter before moving forward with the project.
Step 2: Remove all the debris that is on your roof and gutter. If you have leaves and small twigs on your top, use a rake to remove them. Alternatively, if the debris is too heavy to remove by hand, invest in an electric or gas-powered gutter vacuum cleaner. You will want to avoid aerosol cleaners as they are very harmful to plastics and other synthetic materials since some can break down these substances over time.
Step 3: Gather all your tools for installation like a ladder, safety harnesses (if needed), screws/bolts with a proper screwdriver attachment, and more. Here’s a short list of things you will need for gutter guard installation:
Gutter Guard Installation Tool List:
- Ladder – The higher, the better, but you want to make sure it’s sturdy. You don’t want your ladder folding and dumping a load of water on top of you!
- Safety harnesses – A must if high up off the ground during installation, just if something happens with the ladder.
- Screws/bolts with driver attachment – Pick out screws appropriate for your gutter guard type (see below). If not using pre-installed clips, then also pick out wire ties or silicone sealant as well.
- Drill or screwdriver- depending on what will work best for hardware holes and clip attachments. Remember when looking at drill bits to get one that is the right size for your screws.
- The gutter guard – of course, you wouldn’t want to forget about the gutter guard itself. The most common and effective option would be the mesh gutter guard.
Step 4: Once everything is set, it’s time to install the actual gutter guard. Climb your ladder and position yourself in your gutter system. Secure the gutter guard to your roof with screws or bolts and then attach it by clipping on both sides. Ensure that you don’t drill into the plastic parts of the gutter, as this can damage them in time. Follow the instructions that come with your gutter guard to know how to install it the right way.
Step 5: Once you’ve installed your gutter guard, do a final inspection to make sure it’s properly secured and that you don’t have any loose clips or screws.
That’s it! You’ve just installed a gutter guard Adelaide system for your home. For maintenance and repairs, you can rely on A1_Gutter_Guards to provide expert services and make life easier for you. Call our hotline to book an appointment now.
